Staphylococcus aureus growth and enterotoxin production during the manufacture of uncooked, semihard cheese from cows' raw milk

Staphylococcus aureus growth and enterotoxin production during the manufacture of model Saint-Nectaire, Registered Designation of Origin Saint-Nectaire, and Registered Designation of Origin Salers cheeses, three types of uncooked, semihard, raw milk cheese, were investigated. Coagulase-positive staphylococci (SC+) grew rapidly during the first 6 h. Between 6 and 24 h, counts increased by less than 0.5 log CFU/ml. Raw milk counts ranged from undetectable (<10 CFU/ml) to 3.03 log CFU/ml. Maximal levels reached in cheese on day 1 ranged from 2.82 to 6.84 log CFU/g. The level of SC+ after 24 h was mainly influenced by the milk baseline SC+ level (correlation coefficient, r > 0.80) but pH at 6 h influenced the SC+ growth observed between 6 and 24 h (r > 0.70). Thus, the initial level of SC+ in raw milk should be maintained below 100 CFU/ml and best below 40 CFU/ml. To limit growth, acidification should be managed to obtain pH values around or below 5.8 at 6 h in Saint-Nectaire cheeses and around or below 6.3 at 6 h in Salers cheeses. Enterotoxins were only detected in two Salers cheeses whose SC+ counts on day 1 were 5.55 log CFU/g and 5.06 log CFU/g, respectively, and whose pH values at 6 h were high (approximately 6.6 and 6.5, respectively).     

Association of IgG1 Antibody Clearance with FcγRIIA Polymorphism and Platelet Count in Infliximab-Treated Patients

The FcγRIIA/CD32A is mainly expressed on platelets, myeloid and several endothelial cells. Its affinity is considered insufficient for allowing significant binding of monomeric IgG, while its H131R polymorphism (histidine > arginine at position 131) influences affinity for multimeric IgG2. Platelet FcγRIIA has been reported to contribute to IgG-containing immune-complexe clearance. Given our finding that platelet FcγRIIA actually binds monomeric IgG, we investigated the role of platelets and FcγRIIA in IgG antibody elimination. We used pharmacokinetics analysis of infliximab (IgG1) in individuals with controlled Crohn’s disease. The influence of platelet count and FcγRIIA polymorphism was quantified by multivariate linear modelling. The infliximab half-life increased with R allele number (13.2, 14.4 and 15.6 days for HH, HR and RR patients, respectively). It decreased with increasing platelet count in R carriers: from ≈20 days (RR) and ≈17 days (HR) at 150 × 10⁹/L, respectively, to ≈13 days (both HR and RR) at 350 × 10⁹/L. Moreover, a flow cytometry assay showed that infliximab and monomeric IgG1 bound efficiently to platelet FcγRIIA H and R allotypes, whereas panitumumab and IgG2 bound poorly to the latter. We propose that infliximab (and presumably any IgG1 antibody) elimination is partly due to an unappreciated mechanism dependent on binding to platelet FcγRIIA, which is probably tuned by its affinity for IgG2.     

Growth of one-dimensional Si/SiGe heterostructures by thermal CVD

The first results on a simple new process for the direct fabrication of one-dimensional superlattices using common CVD chambers are presented. The experiments were carried out in a 200?mm industrial Centura reactor (Applied Materials). Low dimensionality and superlattices allow a significant increase in the figure of merit of thermoelectrics by controlling the transport of phonons and electrons. The monocrystalline nanowires produced according to this process are both one-dimensional and present heterostructures, with very thin layers (40?nm) of Si and SiGe. Concentrations up to 30?at.% Ge were obtained in the SiGe parts. Complementary techniques including transmission electronic microscopy (TEM), selected area electron diffraction (SAED), energy dispersive x-ray spectroscopy (EDS), scanning transmission electron microscopy (STEM) in bright field and high angle annular dark field (HAADF STEM), and energy-filtered transmission electron microscopy (EF-TEM) were used to characterize the nanoheterostructures.     

Prevalence of Clostridium difficile in retailed meat in the Netherlands

Recent reports indicate that a large proportion of community-acquired Clostridium difficile infections (CA-CDI) are not linked to recent antibiotic therapy, older age, significant comorbidity or previous hospitalization. Possible community sources for CA-CDI include animals and food, and therefore a surveillance study on the prevalence of C. difficile in meat was performed. Samples of different meat species were collected from the retail trade and analyzed for the presence of C. difficile using a method that included selective enrichment in C. difficile broth, subsequent alcohol shock-treatment and plating onto C. difficile selective medium. C. difficile isolates were tested for the presence of toxin genes and were typed using PCR ribotyping. Of 500 samples tested, 8 (1.6%) were positive for the presence of C. difficile: 1 from lamb (6.3%) and 7 from chicken meat (2.7%). The isolated strains belonged to PCR ribotypes different from those that are currently most frequently found in patients with CDI in the Netherlands, except for C. difficile PCR ribotype 001 which was found in one chicken meat sample. This observation suggests that other matrices than meat may serve as a source for CA-CDI.     

Validation of a supervisory control system for energy savings in membrane bioreactors

The application of fixed operational protocols and settings for membrane bioreactors (MBR) often leads to suboptimal filtration conditions due to the dynamic nature of mixed liquor characteristics. With regard to process optimization and energy savings, the potential benefits of a dynamic control system, enabling to adapt fouling control actions (ACS outputs) in an automated way to the actual mixed liquor fouling propensity, are thus obvious. In this paper, the pilot-scale validation of such an advanced control system (ACS) is elaborated. A specific on-line fouling measurement method, the MBR-VFM (VITO Fouling Measurement), was used for the evaluation of the mixed liquor’s reversible fouling propensity, which was used as a primary ACS input parameter. A first series of tests with a gradual increase in complexity of the selected input and output parameters indicated the functionality of the ACS and demonstrated a substantial reduction of aeration, however sometimes at the expense of a higher fouling rate. The ACS was further fine-tuned and subsequently tested for a longer period under more dynamic operating conditions. A significant correlation was found between the reversible fouling potential measured by the MBR-VFM and the on-line permeability, indicating that the MBR-VFM is a suitable ACS input. Furthermore, an average 22% reduction in aeration flow to the membranes could be achieved without any obvious negative effect on filtration performance. This indicates that this approach is promising to optimize energy consumption in MBRs.     

Mangrove forests as a nature-based solution for coastal flood protection: Biophysical and ecological considerations

Nature-based coastal protection is increasingly recognised as a potentially sustainable and cost-effective solution to reduce coastal flood risk. It uses coastal ecosystems such as mangrove forests to create resilient designs for coastal flood protection. However, to use mangroves effectively as a nature-based measure for flood risk reduction, we must understand the biophysical processes that govern risk reduction capacity through mangrove ecosystem size and structure. In this perspective, we evaluate the current state of knowledge on local physical drivers and ecological processes that determine mangrove functioning as part of a nature-based flood defence. We show that the forest properties that comprise coastal flood protection are well-known, but models cannot yet pinpoint how spatial heterogeneity of the forest structure affects the capacity for wave or surge attenuation. Overall, there is relatively good understanding of the ecological processes that drive forest structure and size, but there is a lack of knowledge on how daily bed-level dynamics link to long-term biogeomorphic forest dynamics, and on the role of combined stressors influencing forest retreat. Integrating simulation models of forest structure under changing physical (e.g. due to sea-level change) and ecological drivers with hydrodynamic attenuation models will allow for better projections of long-term natural coastal protection.     

Face detection approach from video with the aid of KPCM and improved neural network classifier

In recent years, the detection of a human face from the video has become an interesting research topic due to the video surveillance and other security issues. Efficient face detection from the video has become an immense need as it can provide various identity measures in the field of defense and other security-related areas. In our proposed method we have developed an efficient method of face detection to index a particular face from different video shots. The proposed method can be divided into Different modules. In the first module, human face from the video is extracted using segmentation technique. In our proposed method, we have used Kernel-based Possibilistic C-Means for segmentation purpose. The second module in our method is the feature extraction process where shape, LBP, and some geometrical features are extracted. The various shape features like area, circularity, and eccentricity are extracted. Once the feature values are extracted we track the particular face using forward tracking process. After the tracking process, we employ the classification technique. The classifier we utilized here is the improved neural network where the weights factors are optimized using the modified cuckoo search algorithm. The performance is compared with some existing works in order to prove the efficiency of our proposed method.     

Micro structuration of gaas surface by wet etching: towards a specific surface behavior

Resonant microelectromechanical systems are promising devices for real time and highly sensitive measurements. The sensitivity of such sensors to additional mass loadings which can be increased thanks to the miniaturisation of devices is of prime importance for biological applications. The miniaturisation of structures passes through a photolithographic process and wet chemical etching. So, this paper presents new results on the anisotropic chemical etching of the gallium arsenide (GaAs) crystal used for this application, in several solutions. This paper focuses on the micro/nanostructuration of the sensing surface to increase the sensor sensitivity. Indeed, this active surface will be biofunctionalized to operate in biological liquid media in view of biomolecules detection. Several experimental conditions of etching bath composition, concentration and temperature were examined to obtain a large variety of geometrical surfaces topographies and roughness. According to the orientation dependence of the chemical etching process, the experiments were also performed on various GaAs crystal plates. The bath 1 H3PO4:9 H2O2:1 H2O appeared to be particularly adapted to the fabrication of the GaAs microstructured membrane: indeed, the bath is highly stable, anisotropic, and, as a function of temperature, it allows the production of a large variety of GaAs surface topographies.     

Enhanced Optical Properties and Opaline Self‐Assembly of PPV Encapsulated in Mesoporous Silica Spheres

A new poly(p‐phenylenevinylene) (PPV) composite material has been developed by the incorporation of insoluble PPV polymer chains in the pores of monodisperse mesoporous silica spheres through an ion‐exchange and in situ polymerization method. The polymer distribution within the resultant colloidal particles is characterized by electron microscopy, energy dispersive X‐ray microanalysis, powder X‐ray diffraction, and nitrogen adsorption. It was found that the polymer was selectively incorporated into the mesopores of the silica host and was well distributed throughout the body of the particles. This confinement of the polymer influences the optical properties of the composite; these were examined by UV–vis and fluorescence spectroscopy and time‐correlated single‐photon counting. The results show a material that exhibits an extremely high fluorescence quantum yield (approaching 85%), and an improved resistance to oxidative photobleaching compared to PPV. These enhanced optical properties are further complemented by the overall processability of the colloidal material. In marked contrast to the insolubility of PPV, the material can be processed as a stable colloidal dispersion, and the individual composite spheres can be self‐assembled into opaline films using the vertical deposition method. The bandgap of the opal can be engineered to overlap with the emission band of the polymer, which has significant ramifications for lasing.